Search Criteria
Products meeting the search criteria
ACE V3 Xbox 360 Programming Board
The ACE V3 is a compact electronics board designed for use with compatible Xbox 360 motherboards during specialist servicing, development and motherboard programming work.
The board uses a revised 150MHz crystal together with an improved PCB layout designed to provide clean and stable signal performance.
Features
-
ACE V3 board revision
-
High-performance 150MHz crystal
-
Improved PCB layout
-
No solder bridges required
-
Quality electronic components
-
Compatible with Corona V1–V6 motherboards
-
Compact design suitable for electronics servicing
Package Contents
-
1 × ACE V3 Board
-
6 × Connection Wires
-
1 × Double-Sided Adhesive Pad
-
Optional 1 × Pin Header
Optional Programming Header
An optional pin header can be supplied for boards that do not already have one installed.
The header provides a convenient connection point for compatible programming hardware and can either be soldered permanently or temporarily held in position during servicing.
Please note: This product requires soldering and is intended for experienced electronics technicians.
<p><h3>Xbox 360 Corona 4GB USB NAND Tool</h3> <p>The <strong>4GB USB Tool</strong> is designed for reading and writing the NAND on <strong>Xbox 360 Corona motherboards fitted with 4GB NAND storage</strong>.</p> <p>The tool features a built-in card reader, removing the need to source a separate compatible SD card reader to communicate with the NAND. It is designed to work with <strong>4GB NAND variant Corona motherboards</strong> and provides a straightforward solution for technicians carrying out motherboard servicing and NAND recovery work.</p> <p>It can be used as part of the repair process where NAND data has become corrupted or failed, helping technicians restore affected consoles and potentially return otherwise unusable hardware to service.</p> <p>For installers and repair technicians working on multiple consoles, replacement <strong>right-angle motherboard pin headers</strong> are also available separately as consumable items.</p> <p>Available in the <strong>UK and Europe exclusively from ChipChopMod</strong>.</p> <h3>Package Contents</h3> <ul> <li>1 × 4GB USB Tool</li> <li>1 × USB Tool Cable</li> <li>1 × Motherboard Pin Header</li> <li>1 × USB Tool Pin Header</li> </ul> <p><strong>Please note:</strong> Installation requires soldering and is intended for users with suitable electronics repair experience.</p></p>
ACE V3+ Xbox 360 Corona Programming Board
The ACE V3+ is a compact programming and interface board designed for use with compatible Xbox 360 Corona motherboards during specialist electronics servicing and motherboard work.
The board is supplied pre-configured for compatible Corona applications and can also be reprogrammed where required using suitable programming hardware.
Please note that the programming pinout differs slightly from some earlier board revisions, so the programming cable wiring may need to be adjusted depending on the programmer being used.
NAND Compatibility
Before carrying out motherboard servicing, check whether the console uses a:
-
16MB NAND
-
4GB NAND
Different NAND types require different reading and writing hardware.
A standard SPI programmer may be suitable for compatible 16MB NAND boards, while 4GB NAND motherboards require a dedicated 4GB-compatible read/write solution.
Motherboard Compatibility
Some Corona revisions may require an additional motherboard interface adapter depending on the board revision and available signal traces.
For reliable identification, the motherboard should be visually inspected before installation.
Important Information
-
Designed for compatible Xbox 360 Corona motherboards
-
Reprogrammable using suitable programming hardware
-
Compact PCB design
-
Different NAND revisions may require different programming tools
-
Additional interface hardware may be required on some motherboard revisions
-
Intended for experienced electronics technicians
-
Soldering is required
FreeRunner Xbox 360 Development Board
The ChipChopMod FreeRunner is an open-source electronics development board designed for compatible Xbox 360 motherboard servicing, development and signal-processing applications.
Built around the Altera MAX V CPLD, the FreeRunner provides a compact and programmable platform suitable for technicians, electronics developers and enthusiasts working with compatible Xbox 360 hardware.
Its clearly labelled connection points and open-source design make it particularly useful for motherboard development, repair projects and custom electronics work.
Key Features
- Altera MAX V CPLD
- Open-source hardware and firmware
- Programmable electronics platform
- Compatible with selected Xbox 360 Phat and Slim motherboards
- Clearly labelled solder points
- Compact PCB design
- High-quality components
- Suitable for development, servicing and custom electronics projects
Compatible Motherboard Families
Depending on firmware and project requirements, the board may be used with selected motherboard revisions including:
- Xenon
- Zephyr
- Falcon
- Jasper
- Tonasket
- Trinity
- Corona
- Waitsburg
- Stingray
Compatibility and additional hardware requirements vary depending on motherboard revision and intended application.
Package Contents
- 1 × ChipChopMod FreeRunner Development Board
Programming cables, connection wire and accessories are not included unless otherwise stated.
Important Information
- Intended for experienced electronics users
- Soldering is required
- Programming may be required
- Confirm motherboard compatibility before installation
- Suitable for legitimate repair, servicing and development work
Credits
- ArminAustin200 – Design and Development
- Octal450 – Development Assistance
- DrTrinity – Development Assistance
Deluxe NAND-X & JR Programmer Cable
A reusable NAND programming cable designed for use with compatible NAND-X and JR Programmer hardware.
Each cable is hand assembled and fitted with Dupont male crimps on the ends, giving a clean and reliable connection without the need to repeatedly strip, trim or rework bare wire ends.
This makes the cable especially useful for technicians carrying out multiple NAND read/write jobs, where a durable and reusable connection is preferable to temporary wiring.
Key Features
- Compatible with suitable NAND-X and JR Programmer setups
- Designed for NAND reading and writing
- Hand assembled
- Dupont male crimps fitted to the cable ends
- Reusable across multiple jobs
- Helps provide a secure and consistent connection
- Supplied with heat-shrink tubing for additional insulation where required
- Suitable for both occasional users and experienced technicians
Ideal for Repeated Use
Unlike basic bare-ended wiring, the fitted crimps help reduce wear on the cable ends and make repeated connection much easier.
The supplied heat-shrink tubing can be positioned where required and shrunk into place to help protect and tidy the cable assembly.
Please note: Programming hardware is not included. Compatibility should be checked with your programmer and target board before use.
JR Programmer V2
The JR Programmer V2 is a compact USB programming tool designed for Xbox 360 NAND reading, writing and motherboard servicing.
It provides fast access to compatible Xbox 360 NAND devices and is suitable for repair technicians, electronics enthusiasts and users carrying out board-level diagnostics or firmware recovery work.
A pin header is included to make connection to compatible boards easier.
Key Features
- Fast Xbox 360 NAND reading and writing
- Compatible with selected Xbox 360 Phat and Slim consoles
- Suitable for motherboard servicing and diagnostics
- Compatible with NAND-X QSB accessories
- Supports POST monitoring
- Onboard power and data LEDs
- Firmware upgrade support
- Designed for use with J-Runner
- Compact and reusable programming tool
USB Connection
A Mini USB cable is required to connect the JR Programmer V2 to your computer.
Please note this uses Mini USB, not Micro USB or USB-C.
USB cable is not included.
Important Usage Information
The exposed pins on the underside of the programmer must not be allowed to touch conductive metal surfaces while powered, as this could short the board and cause permanent damage.
We recommend insulating the underside using Kapton tape, suitable electrical insulation tape or a non-conductive enclosure.
Bootloader Mode
The programmer may occasionally remain in bootloader mode after using the onboard mode switch.
If the status LED remains permanently red and the programmer is no longer operating normally, the firmware may need to be reflashed.
This can be carried out using J-Runner, which includes compatible JR Programmer firmware.
Package Contents
- 1 × JR Programmer V2
- 1 × NAND Read/Write Cable
- 1 × Programming Cable
- 1 × Pin Header
Please note: Mini USB cable is not included.
Viper V2 Xbox 360 Corona 16MB Motherboard Adapter
This adapter is designed for use with the Viper V2 dual-NAND development board and provides compatibility with selected Xbox 360 Corona motherboards fitted with 16MB NAND.
It acts as the interface between the main Viper board and the compatible Corona motherboard, helping provide a cleaner and more structured installation.
Compatibility
Suitable for:
- Xbox 360 Corona motherboards
- 16MB NAND versions only
- Viper V2 development hardware
Important
This adapter is not suitable for 4GB NAND Corona motherboards.
Please confirm the NAND type before ordering.
Key Features
- Designed for Viper V2 hardware
- Compatible with selected 16MB Corona motherboards
- Compact QSB-style design
- Suitable for development and diagnostic applications
- Cleaner installation than extensive point-to-point wiring
- Intended for experienced electronics users
Installation
Installation requires soldering and correct motherboard identification.
The main Viper V2 board is required separately.
Package Contents
- 1 × Viper V2 Corona 16MB Motherboard Adapter
Viper V2 Xbox 360 Dual-NAND Development Board
The Viper V2 is a compact dual-NAND development board designed for compatible Xbox 360 16MB NAND motherboards.
It provides a clean QSB-style installation and allows users to maintain and switch between two compatible NAND configurations for development, diagnostics and motherboard servicing.
Key Features
- Dual-NAND architecture
- Compact board footprint
- QSB-based installation
- Minimal wiring compared with traditional dual-NAND setups
- No motherboard trace cutting required
- Easy NAND selection
- Suitable for compatible 16MB Xbox 360 motherboards
- Designed for development and diagnostic use
Compatibility
Direct compatibility:
- Xbox 360 Trinity
With suitable Viper adapters:
- Selected 16MB Corona motherboards
- Selected Xbox 360 Phat motherboards
Adapters may be required depending on motherboard revision.
Installation
Installation requires:
- Console disassembly
- Soldering
- Correct motherboard identification
- NAND backup and programming experience
This product is intended for experienced electronics users.
Important Information
Always create and verify NAND backups before installation or programming.
Incorrect NAND data or installation can prevent the console from booting.
Package Contents
- 1 × Viper V2 Dual-NAND Board
Adapters and additional installation hardware are not included unless specifically stated.
Viper V2 Xbox 360 PHAT Motherboard Adapter
This adapter is designed for use with the Viper V2 dual-NAND development board and provides compatibility with selected Xbox 360 PHAT motherboards.
It acts as the interface between the main Viper board and compatible 16MB NAND PHAT consoles, helping provide a cleaner and more structured installation.
Compatibility
Suitable for selected:
- Falcon
- Jasper
- Opus
Key Features
- Designed for Viper V2 hardware
- Compatible with selected Xbox 360 PHAT motherboards
- QSB-style installation
- Suitable for dual-NAND development and diagnostics
- Compact PCB design
- Intended for experienced electronics users
Installation
Installation requires soldering and correct motherboard identification.
The main Viper V2 board is required separately.
Package Contents
- 1 × Viper V2 PHAT Motherboard Adapter
The Viper Triple NAND is an advanced programmable development board for compatible Xbox 360 motherboards, allowing up to three separate NAND configurations to be stored and selected from one system.
It is designed for development, diagnostics, firmware testing and advanced motherboard servicing.
Key Features
- Three separate NAND configurations
- Compact QSB design
- Minimal wiring
- No trace cutting required
- Compatible with selected 16MB Xbox 360 motherboards
- NAND selection using the console sync button
- Windows utility support
- Suitable for development and diagnostic work
Compatibility
Designed for selected:
- 16MB Jasper motherboards
- Compatible Xbox 360 Slim motherboards
- Other supported boards with suitable adapters
Installation
Installation requires soldering, motherboard identification and NAND programming experience.
This product is intended for experienced electronics users and developers.
Important Information
Always create verified NAND backups before making changes.
Incorrect programming or installation may prevent the system from booting.