<p><h3>Xbox 360 Corona 4GB USB NAND Tool</h3> <p>The <strong>4GB USB Tool</strong> is designed for reading and writing the NAND on <strong>Xbox 360 Corona motherboards fitted with 4GB NAND storage</strong>.</p> <p>The tool features a built-in card reader, removing the need to source a separate compatible SD card reader to communicate with the NAND. It is designed to work with <strong>4GB NAND variant Corona motherboards</strong> and provides a straightforward solution for technicians carrying out motherboard servicing and NAND recovery work.</p> <p>It can be used as part of the repair process where NAND data has become corrupted or failed, helping technicians restore affected consoles and potentially return otherwise unusable hardware to service.</p> <p>For installers and repair technicians working on multiple consoles, replacement <strong>right-angle motherboard pin headers</strong> are also available separately as consumable items.</p> <p>Available in the <strong>UK and Europe exclusively from ChipChopMod</strong>.</p> <h3>Package Contents</h3> <ul> <li>1 × 4GB USB Tool</li> <li>1 × USB Tool Cable</li> <li>1 × Motherboard Pin Header</li> <li>1 × USB Tool Pin Header</li> </ul> <p><strong>Please note:</strong> Installation requires soldering and is intended for users with suitable electronics repair experience.</p></p>
JR Programmer V2
The JR Programmer V2 is a compact USB programming tool designed for Xbox 360 NAND reading, writing and motherboard servicing.
It provides fast access to compatible Xbox 360 NAND devices and is suitable for repair technicians, electronics enthusiasts and users carrying out board-level diagnostics or firmware recovery work.
A pin header is included to make connection to compatible boards easier.
Key Features
- Fast Xbox 360 NAND reading and writing
- Compatible with selected Xbox 360 Phat and Slim consoles
- Suitable for motherboard servicing and diagnostics
- Compatible with NAND-X QSB accessories
- Supports POST monitoring
- Onboard power and data LEDs
- Firmware upgrade support
- Designed for use with J-Runner
- Compact and reusable programming tool
USB Connection
A Mini USB cable is required to connect the JR Programmer V2 to your computer.
Please note this uses Mini USB, not Micro USB or USB-C.
USB cable is not included.
Important Usage Information
The exposed pins on the underside of the programmer must not be allowed to touch conductive metal surfaces while powered, as this could short the board and cause permanent damage.
We recommend insulating the underside using Kapton tape, suitable electrical insulation tape or a non-conductive enclosure.
Bootloader Mode
The programmer may occasionally remain in bootloader mode after using the onboard mode switch.
If the status LED remains permanently red and the programmer is no longer operating normally, the firmware may need to be reflashed.
This can be carried out using J-Runner, which includes compatible JR Programmer firmware.
Package Contents
- 1 × JR Programmer V2
- 1 × NAND Read/Write Cable
- 1 × Programming Cable
- 1 × Pin Header
Please note: Mini USB cable is not included.
XFlasher 360 Replacement Programming Cable Set
Replacement cable set for compatible XFlasher 360 programming and diagnostic hardware.
Ideal for replacing damaged, worn or missing cables used during motherboard servicing and development work.
Contents
- 1 × NAND Header Cable
- 1 × Programming Cable
- 1 × eMMC Cable
- 1 × Dupont Breakaway Crystal Connector
Key Features
- Replacement cable set for XFlasher 360
- Suitable for memory access and programming work
- Includes eMMC connectivity
- Useful for diagnostics, repair and development
- Ideal as a spare workshop cable set
Important Information
This listing is for the cable set only.
The programmer hardware is not included.
XFlasher 360 Rev C Development Programmer
The XFlasher 360 Rev C is an all-in-one programming and diagnostic interface for compatible Xbox 360 motherboards.
It combines support for traditional NAND access, 4GB eMMC storage and external programmable devices in a single compact tool.
Key Features
- Supports compatible 16MB NAND devices
- Integrated 4GB eMMC interface
- SPI and eMMC mode selection
- Fast memory read/write capability
- Integrated EEPROM
- FT reset button
- Native Windows x64 driver support
- Compatible with J-Runner with Extras
- Supplied with programming cables
- Suitable for diagnostics, development and motherboard servicing
Integrated 4GB eMMC Support
The XFlasher 360 includes built-in support for compatible 4GB Corona eMMC systems, removing the need for a separate SD card reader or additional memory programming tool.
Included Cables
Supplied with:
- NAND programming cable
- Device programming cable
- 4GB eMMC connection cable
Software Support
Designed for use with J-Runner with Extras, providing an integrated interface for compatible memory access and programming functions.
Compatibility
Suitable for compatible Xbox 360 motherboard revisions.
Connection method varies by board type, so correct motherboard identification is required before use.
Package Contents
- 1 × XFlasher 360 Rev C
- 1 × NAND Programming Cable
- 1 × Device Programming Cable
- 1 × 4GB eMMC Cable
Maximus 360 Lizard Replica
The Maximus 360 Lizard Replica is a modern reproduction of the original Maximus 360 Lizard hardware tool, designed for servicing and diagnostics of compatible Xbox 360 DVD drives.
This updated version uses modern components including USB-C connectivity, a replaceable display module and MicroSD storage.
Key Features
- USB-C connection
- Removable 30-pin display
- MicroSD card support
- Standalone operation
- PC-connected operation
- Drive identification and diagnostics
- Firmware backup and restoration functions
- Key data reading for repair and replacement work
- Compatible with a wide range of Xbox 360 optical drives
Compatible Drive Families
Suitable for compatible Xbox 360 DVD drives from:
- Samsung
- Hitachi
- BenQ
- Lite-On
- Xbox 360 Slim Lite-On
Exact compatibility varies by drive revision.
Ideal For
- Optical-drive diagnostics
- Drive PCB replacement
- Firmware backup
- Repair and restoration work
- Drive identification
- Console preservation projects
Package Contents
- 1 × Maximus 360 Lizard Replica
- 1 × Removable 30-Pin Display
- 1 × MicroSD Card
Important Information
This is a modern reproduction and is not an original Maximus-branded unit.
It is intended for experienced repair technicians and electronics users working on hardware they own or are authorised to service.
Viper Pro Xbox 360 Dual-NAND Development Board
The Viper Pro is an advanced programmable hardware platform for compatible Xbox 360 motherboards, combining dual-NAND storage, onboard NAND programming and diagnostic monitoring in a single system.
It is designed for technicians, developers and electronics users who require convenient access to multiple NAND configurations without repeatedly opening the console.
Key Features
- Dual-NAND architecture
- Integrated high-speed NAND programmer
- External selector daughterboard
- POST monitoring
- UART monitoring
- Status LEDs
- Windows configuration utility
- QSB-based installation
- Suitable for motherboard diagnostics and development
Integrated NAND Access
The onboard programmer allows compatible NAND devices to be read and written through the installed hardware.
The external daughterboard provides easier access to NAND selection and system status after installation.
Diagnostic Features
Built-in POST and UART monitoring provide additional visibility during motherboard testing, development and troubleshooting.
Installation
Installation requires:
- Xbox 360 motherboard disassembly
- Soldering
- Correct motherboard identification
- NAND programming knowledge
- Suitable Windows software
This product is intended for experienced electronics users.
Package Contents
- 1 × Viper Pro Main Board
- 1 × External Daughterboard
- 1 × POST/UART Monitoring Board
- Associated connection hardware as supplied
Important Information
Always create and verify backups before writing to NAND memory. Incorrect programming may prevent the console from booting.