Create your own professionally prepared Xbox 360 Slim with a choice of storage, accessories, lighting and hardware options.
Each system is fully dismantled, professionally cleaned, serviced and tested before dispatch.
Professional Refurbishment
Every console receives:
- Complete disassembly
- Internal inspection
- Thorough internal cleaning
- Case cleaning
- Cooling fan cleaning
- Heatsink cleaning
- Fresh thermal compound
- Reassembly
- Functional testing
These are pre-owned systems, so some cosmetic wear may remain.
Software & Utility Support
Compatible systems may be supplied with supported dashboard utilities, homebrew applications and emulator software suitable for development and enthusiast use.
Commercial ROM libraries and unauthorised game copies are not supplied.
Storage Options
Standard configuration includes a 250GB hard drive, with optional upgrades including:
- 320GB
- 500GB
- 750GB
- 1TB
- 2TB
Additional external storage options may also be available.
Optional Upgrades
Available configuration options may include:
- Power supply
- Wired controller
- Wireless controller
- Larger internal storage
- Internal USB connection
- Custom LED lighting
- RGB fan lighting
- Advanced storage support
Custom Lighting
Available lighting options may include:
- Alternative front LED colours
- Internal fan lighting
- RGB lighting
- Software-controlled RGB options where compatible
Important Information
- Consoles are pre-owned and professionally refurbished
- Cosmetic wear may be present
- Commercial game libraries are not included
- Advanced storage configurations may require additional PC software
- Some options are intended for experienced users
FreeRunner Xbox 360 Development Board
The ChipChopMod FreeRunner is an open-source electronics development board designed for compatible Xbox 360 motherboard servicing, development and signal-processing applications.
Built around the Altera MAX V CPLD, the FreeRunner provides a compact and programmable platform suitable for technicians, electronics developers and enthusiasts working with compatible Xbox 360 hardware.
Its clearly labelled connection points and open-source design make it particularly useful for motherboard development, repair projects and custom electronics work.
Key Features
- Altera MAX V CPLD
- Open-source hardware and firmware
- Programmable electronics platform
- Compatible with selected Xbox 360 Phat and Slim motherboards
- Clearly labelled solder points
- Compact PCB design
- High-quality components
- Suitable for development, servicing and custom electronics projects
Compatible Motherboard Families
Depending on firmware and project requirements, the board may be used with selected motherboard revisions including:
- Xenon
- Zephyr
- Falcon
- Jasper
- Tonasket
- Trinity
- Corona
- Waitsburg
- Stingray
Compatibility and additional hardware requirements vary depending on motherboard revision and intended application.
Package Contents
- 1 × ChipChopMod FreeRunner Development Board
Programming cables, connection wire and accessories are not included unless otherwise stated.
Important Information
- Intended for experienced electronics users
- Soldering is required
- Programming may be required
- Confirm motherboard compatibility before installation
- Suitable for legitimate repair, servicing and development work
Credits
- ArminAustin200 – Design and Development
- Octal450 – Development Assistance
- DrTrinity – Development Assistance
Deluxe NAND-X & JR Programmer Cable
A reusable NAND programming cable designed for use with compatible NAND-X and JR Programmer hardware.
Each cable is hand assembled and fitted with Dupont male crimps on the ends, giving a clean and reliable connection without the need to repeatedly strip, trim or rework bare wire ends.
This makes the cable especially useful for technicians carrying out multiple NAND read/write jobs, where a durable and reusable connection is preferable to temporary wiring.
Key Features
- Compatible with suitable NAND-X and JR Programmer setups
- Designed for NAND reading and writing
- Hand assembled
- Dupont male crimps fitted to the cable ends
- Reusable across multiple jobs
- Helps provide a secure and consistent connection
- Supplied with heat-shrink tubing for additional insulation where required
- Suitable for both occasional users and experienced technicians
Ideal for Repeated Use
Unlike basic bare-ended wiring, the fitted crimps help reduce wear on the cable ends and make repeated connection much easier.
The supplied heat-shrink tubing can be positioned where required and shrunk into place to help protect and tidy the cable assembly.
Please note: Programming hardware is not included. Compatibility should be checked with your programmer and target board before use.
JR Programmer V2
The JR Programmer V2 is a compact USB programming tool designed for Xbox 360 NAND reading, writing and motherboard servicing.
It provides fast access to compatible Xbox 360 NAND devices and is suitable for repair technicians, electronics enthusiasts and users carrying out board-level diagnostics or firmware recovery work.
A pin header is included to make connection to compatible boards easier.
Key Features
- Fast Xbox 360 NAND reading and writing
- Compatible with selected Xbox 360 Phat and Slim consoles
- Suitable for motherboard servicing and diagnostics
- Compatible with NAND-X QSB accessories
- Supports POST monitoring
- Onboard power and data LEDs
- Firmware upgrade support
- Designed for use with J-Runner
- Compact and reusable programming tool
USB Connection
A Mini USB cable is required to connect the JR Programmer V2 to your computer.
Please note this uses Mini USB, not Micro USB or USB-C.
USB cable is not included.
Important Usage Information
The exposed pins on the underside of the programmer must not be allowed to touch conductive metal surfaces while powered, as this could short the board and cause permanent damage.
We recommend insulating the underside using Kapton tape, suitable electrical insulation tape or a non-conductive enclosure.
Bootloader Mode
The programmer may occasionally remain in bootloader mode after using the onboard mode switch.
If the status LED remains permanently red and the programmer is no longer operating normally, the firmware may need to be reflashed.
This can be carried out using J-Runner, which includes compatible JR Programmer firmware.
Package Contents
- 1 × JR Programmer V2
- 1 × NAND Read/Write Cable
- 1 × Programming Cable
- 1 × Pin Header
Please note: Mini USB cable is not included.
Xbox 360 Slim Lite-On Replacement DVD Drive PCB
Replacement controller PCB for compatible Xbox 360 Slim Lite-On DVD drives, designed for repair and restoration of faulty optical-drive electronics.
This board is suitable for selected DG-16D4S and DG-16D5S drives and can be programmed with the required console-specific drive information as part of a replacement or repair procedure.
Compatible Drives
- Lite-On DG-16D4S
- Lite-On DG-16D5S
Always confirm the drive model before ordering.
Drive Pairing Information
Xbox 360 DVD drives contain console-specific identification data which must be present on a replacement controller board for the drive to operate correctly.
When replacing a failed PCB, the required information should be recovered from the original drive or from a verified backup wherever possible.
Optional Programming Service
We can also supply the replacement PCB pre-programmed where the necessary drive information is provided.
Because drive labels may not always reflect previous repairs or replacements, technicians should verify the console and drive information before programming.
Key Features
- Replacement Xbox 360 Slim DVD-drive PCB
- Compatible with selected Lite-On drives
- DG-16D4S compatibility
- DG-16D5S compatibility
- Suitable for optical-drive repair
- Programmable with console-specific drive information
- Optional programming service available
Important
This board is intended for repair and restoration of compatible Xbox 360 hardware.
Correct drive information is required before installation, and specialist programming equipment or experience may be necessary.
Matrix V1 Xbox 360 Programmable Development Board
The Matrix V1 is a compact programmable electronics board suitable for compatible Xbox 360 motherboard servicing, development and signal-testing applications.
This version is supplied without an onboard crystal oscillator, making it suitable for projects where an external or motherboard-derived clock source is required.
The compact PCB provides clearly accessible solder points and is designed for experienced technicians carrying out board-level electronics work.
Key Features
- Compact Matrix V1 PCB
- Supplied without onboard oscillator
- Programmable design
- Accessible signal connection points
- Suitable for selected Xbox 360 motherboard revisions
- Compatible with external programming hardware
- Optional capacitor available for selected applications
Compatible Motherboard Families
Depending on the intended project and firmware configuration, the board can be used with selected Xbox 360 motherboard families including:
- Xenon
- Zephyr
- Falcon
- Jasper
- Trinity
- Corona
Compatibility and connection requirements vary by motherboard revision.
Connection Points
- A – RST
- B – POST
- C – STBY_CLK
- F – EXT_CLK
These labelled pads provide convenient access to the relevant signals during electronics development and servicing.
Installation
Installation requires soldering between the board and compatible motherboard signal points.
Fine-gauge electronics wire is recommended for clean and reliable connections.
Package Contents
- 1 × Matrix V1 Development Board – Without Oscillator
- Optional capacitor if selected
Installation wire, adhesive and programming hardware are not included.
Important Information
This product is intended for experienced electronics users.
Programming, soldering and motherboard identification may be required before use.
Matrix V3 Xbox 360 Programmable Development Board
The Matrix V3 is a compact programmable electronics board suitable for compatible Xbox 360 motherboard servicing, development and signal-processing applications.
This version includes an onboard crystal oscillator, providing an integrated clock source for compatible electronics projects.
The board features clearly accessible connection pads and is intended for experienced technicians carrying out board-level repair, testing and development work.
Key Features
- Matrix V3 PCB
- Integrated crystal oscillator
- Programmable design
- Compact form factor
- Clearly accessible solder points
- Suitable for selected Xbox 360 motherboard revisions
- Compatible with external programming hardware
- Suitable for motherboard servicing and development
Compatible Motherboard Families
Depending on firmware and intended application, the board can be used with selected Xbox 360 motherboard families including:
- Falcon
- Jasper
- Trinity
- Corona
Compatibility and connection requirements vary depending on motherboard revision and intended use.
Connection Points
- A – RST
- B – POST
- C – STBY_CLK
- F – EXT_CLK
Installation
Installation requires soldering between the board and compatible motherboard signal points.
Fine-gauge electronics wire is recommended for clean and reliable connections.
Package Contents
- 1 × Matrix V3 Development Board
- Integrated Crystal Oscillator
Installation wire, adhesive and programming hardware are not included.
Important Information
This product is intended for experienced electronics users.
Programming, soldering and motherboard identification may be required before use.