Your Cart
We use cookies 🍪
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Learn more in our Privacy Policy.
Friendly customer service
Live chat
100% customer satisfaction
Discord support
E: chipchopmod.co.uk
T: 07857705815

Latest Products

Stock: In Stock

ACE V3 Xbox 360 Programming Board

The ACE V3 is a compact electronics board designed for use with compatible Xbox 360 motherboards during specialist servicing, development and motherboard programming work.

The board uses a revised 150MHz crystal together with an improved PCB layout designed to provide clean and stable signal performance.

Features

  • ACE V3 board revision

  • High-performance 150MHz crystal

  • Improved PCB layout

  • No solder bridges required

  • Quality electronic components

  • Compatible with Corona V1–V6 motherboards

  • Compact design suitable for electronics servicing

Package Contents

  • 1 × ACE V3 Board

  • 6 × Connection Wires

  • 1 × Double-Sided Adhesive Pad

  • Optional 1 × Pin Header

Optional Programming Header

An optional pin header can be supplied for boards that do not already have one installed.

The header provides a convenient connection point for compatible programming hardware and can either be soldered permanently or temporarily held in position during servicing.

Please note: This product requires soldering and is intended for experienced electronics technicians.

from
£5.50
Ex Tax:£4.58
Add to Cart
Stock: In Stock

#444 Fine Solder Wick – 3.5mm Desoldering Braid

Our #444 Fine Solder Wick is a high-quality desoldering braid designed for removing excess solder from PCBs, component pads and through-hole connections.

This braid has been produced using a fine copper weave to improve contact with the solder joint and provide efficient solder absorption during electronics repair and rework.

We use this type of braid regularly in our own workshop for console, PCB and general electronics repair.

Key Features

  • Fine copper braid construction

  • 3.5mm width

  • 1.5 metre length

  • Suitable for PCB repair and rework

  • Ideal for removing excess solder

  • Suitable for through-hole and surface-mount work

  • Useful for pad clean-up after component removal

  • Works well with additional soldering flux

Ideal For

  • PCB repair

  • Console motherboard repair

  • SMD rework

  • Through-hole component removal

  • HDMI and connector replacement

  • Cleaning solder pads

  • Removing solder bridges

  • General electronics servicing

How to Use

  1. Place the solder wick over the solder you want to remove.

  2. Position the heated soldering iron tip on top of the braid.

  3. Allow the solder to melt and wick into the copper braid.

  4. Remove the iron and braid together once the solder has been absorbed.

  5. Cut away the used section before continuing.

  6. Repeat if additional solder remains.

For improved performance, applying a small amount of suitable flux to the joint or braid can help the solder flow more easily.

Product Specifications

  • Type: Desoldering Wick / Solder Braid

  • Grade: #444 Fine Braid

  • Width: 3.5mm

  • Length: 1.5m

  • Material: Fine Copper Braid

  • Application: Solder Removal & PCB Rework

Package Contents

  • 1 × 1.5m Reel of #444 Fine Solder Wick

from
£2.90
Ex Tax:£2.42
Add to Cart
Stock: In Stock

0.1mm Enamelled Trace Repair Wire

High-quality 0.1mm enamelled copper wire designed for fine PCB trace repair, jumper wiring and delicate electronics work.

Its very small diameter makes it ideal for repairing damaged or lifted circuit traces where standard hookup wire would be too large.

Suitable For

  • PCB trace repair

  • Lifted or broken pad repair

  • Fine jumper wiring

  • Motherboard repair

  • Console repair

  • HDMI and connector repair

  • SMD and micro-soldering work

  • General electronics servicing

Key Features

  • 0.1mm diameter

  • Fine enamelled copper construction

  • Suitable for precision board-level repair

  • Easy to route around small components

  • Ideal for restoring damaged PCB traces

  • Useful for both professional technicians and experienced hobbyists

Using Enamelled Repair Wire

The enamel coating provides electrical insulation while keeping the overall wire extremely thin.

Before soldering, the enamel must be removed from the section of wire being terminated. This can be done using a suitable stripping method or by carefully tinning the wire depending on the insulation type.

Package Contents

  • 1 × Length / Reel of 0.1mm Trace Repair Wire

from
£3.49
Ex Tax:£2.91
Add to Cart
Stock: In Stock

<h3>0807 SMD RGB Flashing LEDs</h3> <p>Pack of <strong>20 × 0807 SMD RGB flashing LEDs</strong> designed to automatically cycle through a range of colours.</p> <p>As the LEDs transition between colours, the light mixes to create additional shades and colour variations. The most noticeable colours include:</p> <ul> <li>Blue</li> <li>White</li> <li>Pink</li> <li>Green</li> <li>Yellow</li> <li>Red</li> <li>Additional lighter mixed shades</li> </ul> <h3>Available Flash Styles</h3> <p>Two versions are available:</p> <p><strong>Slow Flash</strong><br /> Smoothly transitions from one colour to another for a gradual colour-changing effect.</p> <p><strong>Fast / Slow Flash</strong><br /> Cycles through the same range of colours but also includes a faster flashing mode, alternating between fast and slow patterns.</p> <h3>Key Features</h3> <ul> <li>0807 SMD package size</li> <li>RGB colour-changing effect</li> <li>Automatic colour cycling</li> <li>Multiple visible colour combinations</li> <li>Available in slow-flash or fast/slow-flash versions</li> <li>Suitable for electronics projects, lighting modifications and decorative PCB applications</li> </ul> <h3>Package Contents</h3> <ul> <li>20 × 0807 SMD RGB Flashing LEDs</li> </ul>

from
£2.99
Ex Tax:£2.49
Add to Cart
Stock: In Stock

<h3>Product Name</h3> <p><strong>20 × 30mm Micro Button Speaker – 8Ω 0.8W</strong></p> <h3>Description</h3> <h2>20 × 30mm Micro Button Speaker</h2> <p>Compact <strong>20 × 30mm micro speaker</strong> suitable for electronics projects, replacement applications and custom audio installations.</p> <p>Its small form factor makes it particularly useful where space is limited, including games consoles, laptops, tablets, embedded electronics, toys and custom sound projects.</p> <p>The speaker includes a <strong>self-adhesive backing</strong> to make positioning and installation easier.</p> <h3>Suitable For</h3> <ul> <li>Games console sound projects</li> <li>Xbox 360 custom power/eject sound systems</li> <li>JQ6500 and similar MP3 sound modules</li> <li>Laptop and tablet speaker replacement*</li> <li>Electronic toys</li> <li>Talking or musical cards</li> <li>Embedded electronics</li> <li>DIY audio projects</li> </ul> <p>*Always check the dimensions, impedance and power requirements of the original speaker before replacing it.</p> <h3>Key Features</h3> <ul> <li>Compact 20 × 30mm design</li> <li>8Ω nominal impedance</li> <li>0.8W rated power</li> <li>1.5W maximum power</li> <li>Self-adhesive backing</li> <li>Suitable for compact electronics</li> <li>Easy to integrate into custom projects</li> </ul> <h3>Technical Specifications</h3> <ul> <li><strong>Dimensions:</strong> 20 × 30mm</li> <li><strong>Material:</strong> Metal</li> <li><strong>Voice Coil Impedance:</strong> 8Ω ±15%</li> <li><strong>Resonant Frequency:</strong> 800Hz ±20%</li> <li><strong>Rated Power:</strong> 0.8W</li> <li><strong>Maximum Power:</strong> 1.5W</li> <li><strong>Mounting:</strong> Self-adhesive backing</li> </ul> <h3>Package Contents</h3> <ul> <li>1 × 20 × 30mm Micro Speaker</li> </ul>

from
£1.69
Ex Tax:£1.41
Add to Cart
Stock: In Stock

2835 SMD LED Strip – 5 Metre Roll

Bright and versatile 2835 SMD LED strip lighting supplied on a 5-metre roll, suitable for electronics projects, display lighting, PC cases, games consoles and general decorative lighting applications.

The strip operates from a 12V DC power source and can be cut at the designated cutting points, allowing shorter sections to be used where required.

Ideal For

  • PC case lighting

  • Games console lighting

  • Electronics projects

  • Display cabinets

  • Shelf lighting

  • Decorative lighting

  • Exhibition and display installations

  • Home lighting projects

The flexible strip features a self-adhesive backing, making it easy to position inside compatible enclosures or onto clean, suitable surfaces.

Available Colours

Depending on stock, colour options may include:

  • White

  • Pink

  • Blue

  • Green

  • Red

Product Specifications

  • LED Type: SMD 2835

  • Length: 5 metres

  • Operating Voltage: 12V DC

  • PCB Width: 8mm

  • Water Resistance: Non-waterproof

  • Backing: Self-adhesive

  • Colour Temperature (White): 3000–3200K / 6000–6500K depending on variant

  • Certification: RoHS / CE

  • Power Supply: Not included

Key Features

  • Bright 2835 SMD LEDs

  • Flexible strip design

  • Can be cut at designated cutting points

  • Self-adhesive backing

  • Low-profile 8mm PCB

  • Low heat output

  • Suitable for internal electronics lighting

  • 12V DC operation

Package Contents

  • 1 × 5 Metre 2835 SMD LED Strip

Power supply is not included.

Installation Note

When using the strip inside electronics, always connect it to a suitable 12V DC supply and ensure the available power source can safely provide the required current.

Only cut the strip at its marked cutting points.

from
£8.99
Ex Tax:£7.49
Add to Cart
Stock: In Stock

<p>&lt;h3&gt;Xbox 360 Corona 4GB USB NAND Tool&lt;/h3&gt; &lt;p&gt;The &lt;strong&gt;4GB USB Tool&lt;/strong&gt; is designed for reading and writing the NAND on &lt;strong&gt;Xbox 360 Corona motherboards fitted with 4GB NAND storage&lt;/strong&gt;.&lt;/p&gt; &lt;p&gt;The tool features a built-in card reader, removing the need to source a separate compatible SD card reader to communicate with the NAND. It is designed to work with &lt;strong&gt;4GB NAND variant Corona motherboards&lt;/strong&gt; and provides a straightforward solution for technicians carrying out motherboard servicing and NAND recovery work.&lt;/p&gt; &lt;p&gt;It can be used as part of the repair process where NAND data has become corrupted or failed, helping technicians restore affected consoles and potentially return otherwise unusable hardware to service.&lt;/p&gt; &lt;p&gt;For installers and repair technicians working on multiple consoles, replacement &lt;strong&gt;right-angle motherboard pin headers&lt;/strong&gt; are also available separately as consumable items.&lt;/p&gt; &lt;p&gt;Available in the &lt;strong&gt;UK and Europe exclusively from ChipChopMod&lt;/strong&gt;.&lt;/p&gt; &lt;h3&gt;Package Contents&lt;/h3&gt; &lt;ul&gt; &lt;li&gt;1 × 4GB USB Tool&lt;/li&gt; &lt;li&gt;1 × USB Tool Cable&lt;/li&gt; &lt;li&gt;1 × Motherboard Pin Header&lt;/li&gt; &lt;li&gt;1 × USB Tool Pin Header&lt;/li&gt; &lt;/ul&gt; &lt;p&gt;&lt;strong&gt;Please note:&lt;/strong&gt; Installation requires soldering and is intended for users with suitable electronics repair experience.&lt;/p&gt;</p>

from
£15.99
Ex Tax:£13.32
Add to Cart
Stock: In Stock

500GB 2.5" SATA Hard Drive

Fully tested 500GB 2.5-inch SATA hard drive, suitable for use in compatible laptops, consoles, small form factor PCs and other devices that accept a standard 2.5" SATA drive.

Each drive is checked before dispatch to ensure it is functioning correctly and reports 100% drive health at the time of testing.

Product Details

  • Capacity: 500GB
  • Form Factor: 2.5"
  • Interface: SATA
  • Fully tested before dispatch
  • 100% drive health at time of testing
  • Mixed brands supplied depending on available stock

Please note: Brand, model are random. Product images therefore are for illustration purposes only.

from
£14.99
Ex Tax:£12.49
Add to Cart
Stock: In Stock

60/40 Tin Lead Solder Wire – 3% Flux Core

Professional-quality 60/40 tin/lead solder wire supplied on a 100g reel, suitable for general electronics, PCB work and everyday electrical soldering.

This solder has been produced with a 3% flux core, giving it excellent wetting and flow characteristics. It creates smooth, bright solder joints and is particularly well suited to repair work, component replacement and general workshop use.

The 60/40 tin/lead formulation offers reliable melting and flow characteristics, making it easier to work with than many lead-free alternatives.

Available Diameters

  • 0.6mm
  • 0.7mm
  • 0.8mm
  • 1.0mm

Key Features

  • 60% Tin / 40% Lead composition
  • 3% flux core
  • 100g reel
  • Excellent wetting and flow
  • Produces smooth, bright solder joints
  • Suitable for PCB and electronics repair
  • Ideal for workshop and general soldering use

This is the same solder we use in our own workshop and it has proved to be a dependable choice for day-to-day electronics work.

Important: Contains lead. Suitable handling precautions should be followed and hands should be washed after use.

from
£8.99
Ex Tax:£7.49
Add to Cart
Stock: In Stock

ACE V3+ Xbox 360 Corona Programming Board

The ACE V3+ is a compact programming and interface board designed for use with compatible Xbox 360 Corona motherboards during specialist electronics servicing and motherboard work.

The board is supplied pre-configured for compatible Corona applications and can also be reprogrammed where required using suitable programming hardware.

Please note that the programming pinout differs slightly from some earlier board revisions, so the programming cable wiring may need to be adjusted depending on the programmer being used.

NAND Compatibility

Before carrying out motherboard servicing, check whether the console uses a:

  • 16MB NAND

  • 4GB NAND

Different NAND types require different reading and writing hardware.

A standard SPI programmer may be suitable for compatible 16MB NAND boards, while 4GB NAND motherboards require a dedicated 4GB-compatible read/write solution.

Motherboard Compatibility

Some Corona revisions may require an additional motherboard interface adapter depending on the board revision and available signal traces.

For reliable identification, the motherboard should be visually inspected before installation.

Important Information

  • Designed for compatible Xbox 360 Corona motherboards

  • Reprogrammable using suitable programming hardware

  • Compact PCB design

  • Different NAND revisions may require different programming tools

  • Additional interface hardware may be required on some motherboard revisions

  • Intended for experienced electronics technicians

  • Soldering is required

from
£3.50
Ex Tax:£2.92
Add to Cart
Stock: In Stock

Aladdin XT Plus 2 Original Xbox Programmable Board

The Aladdin XT Plus 2, also known as xenoFX, is a compact programmable LPC-based board designed for compatible Original Xbox motherboard servicing, restoration and development work.

It features 256KB reflashable memory and supports compatible firmware images for technicians and enthusiasts working with Original Xbox hardware.

KEY FEATURES

• 256KB reflashable memory
• Compatible with Original Xbox v1.0–v1.6B
• LPC-based installation
• Two selectable operating modes
• Integrated status LED
• Female pin header fitted to PCB
• Separate male pin header included
• Compatible with optional LPC rebuild boards
• Suitable for motherboard restoration and development projects

LPC REBUILD SUPPORT

Original Xbox v1.6 and v1.6B motherboards may require an LPC rebuild before installation.

Compatible LPC rebuild QSBs are available separately to provide a cleaner, more consistent connection method.

FIRMWARE

The board can be programmed with compatible 256KB firmware images suitable for Original Xbox servicing and development applications.

Firmware compatibility should always be confirmed before flashing.

IMPORTANT INFORMATION

Incorrect programming may leave the board unable to boot until it is recovered using suitable programming equipment.

Only reflash the board if you are familiar with the recovery process.

COMPATIBILITY

• Original Xbox v1.0–v1.6B

PACKAGE CONTENTS

• 1 × Aladdin XT Plus 2 Programmable Board
• 1 × Male Pin Header

from
£10.69
Ex Tax:£8.91
Add to Cart
Stock: In Stock

Build Your Own Refurbished Xbox 360 Slim Console

Choose your ideal professionally refurbished Xbox 360 Slim with optional storage, lighting and hardware upgrades.

Each console is fully dismantled, cleaned, serviced and tested before dispatch, giving you a properly prepared system rather than a basic second-hand console.

Professional Refurbishment

Every console receives:

  • Full disassembly
  • Internal inspection
  • Thorough case cleaning
  • Chassis cleaning
  • Cooling fan cleaning
  • Heatsink cleaning
  • Fresh thermal compound
  • Full reassembly
  • Functional testing

Because these are pre-owned consoles, some cosmetic marks may remain.

Software Configuration

The console can be supplied with supported dashboard tools, utilities and homebrew applications suitable for compatible Xbox 360 development and media use.

Compatible emulator applications may also be installed.

Commercial ROM libraries and unauthorised game copies are not included.

Storage Options

The base system includes a 250GB hard drive, with larger-capacity options available.

Available upgrades may include:

  • 320GB
  • 500GB
  • 750GB
  • 1TB
  • 2TB

External USB storage can also be used where supported.

Optional Upgrades

Available options may include:

  • Power supply and mains lead
  • Wired controller
  • Wireless controller
  • Larger internal storage
  • Internal USB connection
  • Custom Ring of Light colours
  • Fan lighting
  • RGB lighting
  • Advanced storage configuration

Internal USB Option

An optional internal USB connection can be fitted inside the console for compatible storage or accessory applications.

Custom Lighting

Lighting options may include:

  • Alternative Ring of Light colours
  • Internal LED lighting
  • RGB fan lighting

Important Information

  • Consoles are pre-owned and professionally refurbished
  • Cosmetic wear may be present
  • Optional software is intended for legitimate homebrew and development use
  • Commercial game libraries are not supplied
  • Advanced storage options may require additional PC software for future drive preparation
from
£94.99
Ex Tax:£79.16
Add to Cart
Showing 1 to 12 of 89 (8 Pages)